Dug to the Right Depth
We excavate deep enough to fit the basecourse, reinforcing and slab thickness your concrete needs for how it will be used.
Concrete Preparation
Digging and base prep ahead of concrete slabs, paths, driveways and other pours around Auckland.
Planned properly. Finished tidy.
Concrete is only as strong as the ground beneath it, and good groundwork prevents cracking, settling and costly repairs. We provide concrete preparation in Auckland for slabs, driveways, paths, sheds, garages and commercial hardstands.
Our team excavates to the required depth, removes unsuitable material, spreads and compacts base, and shapes the surface to the correct levels and falls. We work closely with concreters and builders to ensure formwork can go in smoothly, and we leave the site clean and ready for the pour.
Using quality machinery and careful measuring, we deliver accurate, consistent results every time. Whether it is a small residential slab or a large commercial area, you can rely on tidy workmanship, fair pricing and prompt service. Contact us today for a free quote.
We excavate deep enough to fit the basecourse, reinforcing and slab thickness your concrete needs for how it will be used.
A well-compacted base is what stops slabs cracking and settling. We compact thoroughly to spec before the concreter gets started.
The prepared area is shaped with proper falls, so rain runs off the finished concrete rather than sitting on it or heading toward the house.
The site is left level and dug to the right shape, so formwork and reinforcing can go straight in without the concreter needing to adjust it.
We can coordinate with your concreter, so the preparation is finished in line with their pour date and specifications.
When the preparation is complete, the site is ready for concrete, keeping your project on track without delays from unfinished groundwork.
Often booked alongside Sewer Line Excavation, Trenching, Trenching for Power/Fibre/Cabling, Culvert Installation and other prep work where access, levels and a tidy handover count. It all sits within our civil and utility works work.
We pick the machine and attachments only once we have looked at access, reach, the ground, how much material is moving and the finish you need.
What applies depends on Auckland Council, your property and the job. Any approvals, beforeUdig locating and site controls need confirming before we start.
What drives the cost
Every site is different. Here is what makes the biggest difference to a concrete preparation quote.
Thicker slabs, or pours with extra base under them, need a deeper box-out, which adds excavator time and labour to the preparation.
Many parts of Auckland sit on reactive clay that moves with moisture, so extra compaction or stabilising may be needed, adding to the cost.
A big patio, shed slab or driveway takes more time and base material to prepare than a small pad, so area is a straightforward cost driver.
Shaping the base so the finished concrete sheds water, and allowing for drainage points, adds care and time to the preparation work.
What we bring
Concrete preparation has to suit your concreter’s requirements exactly, and we already have the digging and levelling gear to get it right. Instead of calling in a separate excavation contractor before the pour, our crew prepares the site efficiently and to specification. Your concreter can then go straight into boxing and pouring, without delays caused by miscommunication between different companies.
What is covered
Concreters price on turning up to a prepared base. This scope is how that base gets prepared.
Why work with us
Preparation is what decides whether a slab or driveway lasts for decades or starts cracking within a few years. We excavate to the right depth for your project, allowing for base material, reinforcing and slab thickness, and then compact thoroughly to specification. The prepared area includes the right falls to carry surface water away once the concrete is poured, protecting both the slab and the buildings around it.
The site is left level and correctly excavated, ready for boxing and steel without your concreter needing to make adjustments. We line up our timing with your concrete contractor so preparation fits neatly with their pour date. Having prepared sites for concrete work on all sorts of Auckland properties, we know exactly what a concreter needs to get on with the job. Paying attention to groundwork that others tend to skip is what makes our concrete preparation dependable.
Getting the site ready
Your concreter has a pour date in the diary. These four make sure the ground is ready for it.
Move vehicles, materials and anything else off the area. Digging and grading need open access across the entire footprint of the concrete.
Tell us about pipes or cable near the prep area. Digging down for a slab can sometimes go deep enough to reach a buried service line.
Have the size, depth and reinforcing details from your concreter ready, so the prepared ground matches exactly what the pour needs.
Agree dates so our prep finishes in step with your concreter’s schedule, keeping boxing and the pour on track without delay.
Where we work
Concrete preparation work comes from new subdivisions and from established suburbs where homeowners are adding driveways or patios.
Concrete site preparation is available throughout the Auckland region.
Common questions
We work right across metropolitan Auckland, and regional or rural jobs can be looked at case by case. Include your suburb when you ask for a quote and we’ll confirm whether we can help.
Not always. Simpler jobs can often be priced from plans and photos, but sites with awkward access or a complicated scope are usually worth a visit first.
It depends on Auckland Council’s rules, your property and the scope of the job. Check what applies before anything starts—we can help you work out what to ask the council.
We cover residential, rural, commercial and civil work. Whether a particular job suits us comes down to access, programme, the plant needed and the confirmed scope.